URUNLERIMIZ...

OBER is a market leader for pneumatic motors. Our motors are known for their precision design and construction and are suitable for a wide range of applications. OBER motors are used in a wide variety of applications throughout industry and are chosen because of these outstanding features:

EXCELLENT SIZE-WEIGHT/POWER RATIO
 
These pneumatic motors concentrate high power in a small, compact package. A motor with a diameter of 32 mm and a length of 70 mm delivers a power of more than 0.5 HP.

FLEXIBILITY

Pneumatic motors vary their speed to match variations in load and can even jam without causing any breakage or damage.

POWER DELIVERY
 
Pneumatic motors can deliver full power immediately at start up. The low inertia of the moving components under no-load conditions mean that pneumatic motors start and stop practically instantly.

EASY ADJUSTMENT

The speed and torque delivered by a pneumatic motor is adjusted by simply regulating the air supply on a throttle valve. The motor can also be powered at low pressures so that the maximum speed is reached gradually. Versions operating at pressures below 1 bar are also available.

SIMPLE CONSTRUCTION

Pneumatic motors have a small number of components. This feature makes these motors long-lasting and easy to maintain.

VERY ADAPTABLE TO ENVIRONMENTAL CONDITIONS

Design features and operating at pressures higher than ambient pressure will ensure that a pneumatic motor continues to operate efficiently in very dusty or humid conditions. Special versions are also available for those applications where a high degree of insulation between the motor and the surrounding environment is required.

SAFETY

Under normal operating conditions a pneumatic motor does not produce sparks and will not overheat. This combined with the fact the motor is not connected directly to an electrical power source means that there is no risk of a short-circuit. There is therefore no risk of electrocution from the power supply system. With the right design features, pneumatic motors can be used to operate in flammable environments. The could be used, for example, where solvents and paints are mixed.

OPERATING PRESSURE

The rated operated pressure of pneumatic motors is 6 bar. Pneumatic motors are chosen taking into consideration three basic parameters: POWER, SPEED and TORQUE. The performance figures for each motor show the relationship between these parameters. Motors can be used at below their rated pressures but this will cause power output reductions. Using motors at above their rated pressure will have practically no influence on technical performance but will shorten motor life.


1
Havalı Tornovidalar
1
Havalı Delme Motorları
1
Kılavuz Çekme Motorları
1
TAŞLAMA MOTORLARI
1
ZIMPARA MOTORLARI
1
Diğer Havalı Aletler
1
Aksesuarlar







 


PARMO-3CX
Anasayfa  |  İletişim   |  Hakkımızda  |  Ürünlerimiz  |
 Copyright © 2007. MAKSAN Makina Tic. ve San. Ltd. Şti..  |